CALCULATOR · TOLERANCE
ISO Fit Tolerance Calculator (ISO 286)
Calculates hole and shaft tolerances and fit type based on ISO 286-1:2010.
Standard
ISO 286-1:2010
JIS Equivalent
JIS B 0401
HOW-TO How to Calculate ISO Fit Tolerances +
- Enter the nominal diameter in mm.
- Select the fundamental deviation (e.g. H, g) and IT grade (e.g. 7, 6) for hole and shaft.
- Tolerances and maximum/minimum clearance or interference are calculated automatically.
- Use the preset buttons to quickly select common fit combinations.
Result
Fit Type
—
- Hole Upper Deviation ES
- — mm
- Hole Lower Deviation EI
- — mm
- Shaft Upper Deviation es
- — mm
- Shaft Lower Deviation ei
- — mm
- Maximum Clearance
- — mm
- Minimum Clearance
- — mm
SPONSORED
- ⚡ LED Resistor Calculator Calculate the required resistor value and power consumption from supply voltage, LED forward voltage, and current
- 📏 Stepper Motor Steps/mm Calculator Calculate steps/mm and travel distance from step angle, microstepping, and drive type
- ↔️ Spur Gear Center Distance Calculator Calculate spur gear center distance and key dimensions from the module and two gear tooth counts
Bearing Size Chart & Bearing Designations — 6204, 608, and 65 Standard Types
2026-06-22
